Millers Classic Running In Oil 30 – 5L

DESCRIPTION:

A mineral based SAE 30 running in oil for vintage and classic engines designed for the initial running in of re-built engines. Use of this product optimises performance and fuel efficiency.

APPLICATION:

Use as received for initial running in of re-built engines. Formulated for running in on the road and can be used for test bed running. Run engine at peak torque to ensure maximum bedding-in of piston rings. Drain and refill with the Millers Classic lubricant most suitable for the engine.

Note: Do not use high performance oils before the bedding-in process is complete.

USER BENEFITS:

• High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in
• Provides full protection to highly stressed valve gear/associated components whilst allowing piston rings to bed in against the bore
• Suitable for 500 miles after which it should be replaced with the appropriate Millers Oils classic engine oil
• Good running in will optimise the performance and fuel efficiency of a reconditioned engine

PERFORMANCE PROFILE:

Designed to provide the performance of API SE/CC. Suitable for 500 miles road use. Very low leak down [4%] obtained after thorough running in process.

Data Sheet Download(s):