CUSTOM EPOXY PRIMER 2025
Rust Protection Epoxy Mastic Paints

Rustbuster Custom Epoxy Primer 421 Gray

€45.53 – €154.47 +Vat

Custom epoxy 421 paint. Primer and rust prevention treatment.

Paint Options

1.25 Litre, 2.5 Litre, 5 Litres

  • Done Free shipping on orders over €150
  • Done Quality Products
  • Done Shipped from Ireland
  • Done Secure Payments
PAY WITH YOUR CARD
  • Visa Card
  • MasterCard
  • Apple Pay

RUST PROOFING PRIMER IN GREY – 2025 NEW FORMULA 3:1 MIX RATIO

PRODUCT COLOUR: GREY

Rustbuster Custom Epoxy Primer serves as the ideal base for priming steel, aluminium, and GRP bodywork. It resists moisture absorption, preventing rust from forming within the primer, even when exposed for long periods. Unlike soft, porous easy-sand primers, Custom Epoxy primer provides durable protection, making it perfect for home auto restorers and garages without a controlled body shop environment.

After a light sanding with P320 abrasive, you can easily over-paint Custom Epoxy Primer with either single-pack cellulose or two-pack finishes.

Product description2 pack modified epoxy rust-proofing primer.
Pack descriptionThe 1.25L kit covers approximately 10m² and includes 750ml of Component A, 250ml of Component B, and 250ml of thinner.

The 2.5L kit covers approximately 20m² and includes 1.5L of Component A, 500ml of Component B, and 500ml of thinner.

The 5L kit covers approximately 40m² and includes 3L of Component A, 1L of Component B, and 1L of thinner.

Application temperatureCan be applied to steel as low as 5c. The steel must be at least 3 degrees above the current dew point. (See our dew point calculator.)
ThinningUse only the epoxy thinner supplied, from 5 to 20% max.
Application & recoatingYou can apply Custom Epoxy by brush or spray. A second coat or topcoat can be added after approximately 8 hours* without the need for abrasion between coats. If recoating or applying a topcoat after the first coat has fully cured (about 7 days), lightly sand the surface with P320 paper.

*At 20°C. In colder conditions, longer drying times may be necessary.

SprayingMinimum 1.8mm nozzle or an HB (high build) primer set up. Test atomisation on a test panel first. Viscosity will vary, i.e. thicker in colder temperatures. Data correct at 20c.

Conventional Spray (Air) 3-4bar – 44-58psi

Airless Spray 18thou tip, 150 bar – 2176psi

Pot lifePot life is the time between mixing the two components and when the paint becomes unusable. For Custom Epoxy, the pot life is 2.5 hours at 20°C.

In colder temperatures, the pot life increases, allowing you more time to apply the mixed paint.

Shelf lifeIt is advised to store the product upside down in a dry location at approximately 20°C. Under these conditions, the product will have a shelf life of up to 12 months.

Please avoid storing it at temperatures below 20°C, as it may impact the product’s performance.

DisposalAllow any excess mixed paint to cure in your mixing cup and throw it away as dry waste.
CleaningClean up with standard thinner or gun wash. Do not thin the paint with standard thinner as this will affect the paint cure.
SafetyUse in a well-ventilated atmosphere. Use a respirator face mask when spraying or brushing in an enclosed space. Please see the MSDS (material safety data sheet) in our data sheet area.

Wear suitable protective clothing, gloves and eye protection.

Paint Options

1.25 Litre, 2.5 Litre, 5 Litres

Related products