Rustbuster CHLOR-X 100 SALT REMOVER super concentrate
€29.27 – €107.32 +Vat
| Sizes | 1 Ltr, 5 Ltr |
|---|
To pay click the PayPal button above. PayPal membership NOT REQUIRED On PayPal use the “Pay by Debit or Credit Card” button below PayPal login.
- Free shipping on orders over €120
- Quality Products
- Shipped from Ireland
- Secure Payments
CHLOR-X Is a unique formulation for the removal of salt contamination from Car bodies and under-bodies as part of a regular wash routine. Removing corrosive road salt and air born contamination. As a surface wash to remove harmful chloride salts prior to power too or blast cleaning. For further details on this very important part of your corrosion prevention click HERE
Dry salt crystals cling so well to the surface of steel that the treatment has to be able to get behind the salt to lift it from the steels surface. Power washing alone cannot do this. A sample coupon of salt contaminated steel boiled for one hour in water will only remove 90% of contaminant salt, it is this hard crystallised salt that requires a special surface surfactant to get behind the crystal and lift it from the surface our formula achieves this at a molecular level not previously available on the UK market. CHLOR-X will also remove salts from concrete and most other substrates.
METHODS OF APPLICATION
3 Chlor-X 100 is 100% concentrated Chlor-X our strongest formulation for use in power wash steam clean or Hydro blast cleaners Dilute 100:1 in Power wash systems Dilute 500:1 in Blast clean systems
Chlor-X 100 can be added to Rustbuster Safer Degreaser at one-part Chlor-X 100 to 10 parts Rustbuster Safer Degreaser. This can then be added to the dosing bottle on your power washer.
| Product Description | A clear liquid in various levels of concentration for the roval of salt. |
| Directions of Use | Chlor-X DTS- Apply direct to bodywork or steel agitating with a nylon brush, apply without diluting. Chlor-X 100- Concentrated formula supplied either with a hose end dispenser or in a bottle. If using the hose end dispenser set the concentration level as required from minimum to maximum. If you have purchased the bottle version dilute with water up to 20 parts water to one part Chlor-X 100. Chlor-X 100- Power washing and stem cleaning, set to 100:1 at maximum pressure 3000psi. Chlor-X 100- Wet abrasive blasting, set ratio to 500:1 approx 1ltr to every 24 mt blast cleaned . In all methods of application hold pressure nozzle perpendicular to the surface and no more then 25cm away to ensure ll surfaces as washed with direct pressure. |
| Cleaning | Brushes and equipment used can be washed clean in fresh water. |
| Safety | Wear suitable protective clothing, gloves and eye protection |
| Sizes | 1 Ltr, 5 Ltr |
|---|
