Name: Rustbuster Chlor-X Salt Remover
SKU: 2787-CHLOR-X SALT REMOVER
Availability: InStock

Product Details

Chlor-X is a unique formula designed to remove salt contamination from car bodies and underbodies, whether you’re preparing to paint or simply incorporating it into your regular wash routine. It effectively eliminates corrosive road salt and airborne contaminants.

Dry salt crystals cling tightly to steel surfaces, making it essential to use a treatment that can penetrate behind the salt and lift it away. While power washing alone is insufficient, even boiling a salt-contaminated steel sample for one hour removes only about 90% of the salt. Therefore, to completely remove this hard, crystallized salt, a special surfactant is required to get behind the crystals and release them from the surface. Our formula achieves this at a molecular level, providing a solution not previously available on the UK market. Additionally, Chlor-X effectively removes salt from concrete and most other surfaces.

Methods of Application

Chlor-X Salt Remover is available in two formulations:

Chlor-X DTS (Direct to Surface) – A ready-to-use formula.
First, wash the surface with Rustbuster Safer Degreaser.
Then, apply Chlor-X DTS directly to the metal surface using the trigger spray bottle.
After allowing it to sit for 10 minutes, rinse it off with a hose.

Chlor-X 100 – A 100% concentrated formula.
For power wash systems, dilute Chlor-X 100 at 100:1, or dilute at 500:1 in blast cleaning systems.
You can also mix Chlor-X 100 with Rustbuster Safer Degreaser at a ratio of 1 part Chlor-X 100 to 10 parts Safer Degreaser.
Afterward, place the mixture into the dosing bottle of your power washer.
Let it sit for 10 minutes before hosing it off.

Product Description	A clear liquid in various levels of concentration for the roval of salt.
Directions of Use	Chlor-X DTS- Apply direct to bodywork or steel agitating with a nylon brush, apply without diluting. Chlor-X 100- Concentrated formula supplied either with a hose end dispenser or in a bottle. If using the hose end dispenser set the concentration level as required from minimum to maximum. If you have purchased the bottle version dilute with water up to 20 parts water to one part Chlor-X 100. Chlor-X 100- Power washing and stem cleaning, set to 100:1 at maximum pressure 3000psi. Chlor-X 100- Wet abrasive blasting, set ratio to 500:1 approx 1ltr to every 24 mt blast cleaned . In all methods of application hold pressure nozzle perpendicular to the surface and no more then 25cm away to ensure ll surfaces as washed with direct pressure.
Cleaning	Brushes and equipment used can be washed clean in fresh water.
Safety	Wear suitable protective clothing, gloves and eye protection